Sewing machines are one of the most down played yet essential tool for human existence. However, for those who are even vaguely into sewing proper usage and maintenance of your machine will ensure it produces the best and most stylish clothes for a long time. This is because well-maintained machine yields the best results and extends its life. Below are six such must-have tips that would go a long way in enabling the smooth running of your sewing machine:

• Regularly clean and maintain it.
• Use good-quality thread and needles.
• Check the tension and stitch settings and reset.
• Replace the needles and bobbins on time.
• Store properly when not in use

Cleaning and Maintenance Regularly

Cleaning and maintaining a sewing machine regularly are its most important elements. Dust, lint, and loose threads can accumulate leading to clogging of various moving parts of your machine. To fix this ensure to use a small brush or lint roller to remove lint from the needle plate and bobbin case areas. In addition, superior quality thread and needles are to be employed to enhance the machine’s life. The usage of poor-quality thread can break gears and seriously damage the machine. Additionally you can get a professional maintenance at the sewing machine repair shop near you.

Check the Tension and Stitch Settings and Reset

The quality of the materials you use can affect the performance of your sewing machine to quite a large extent. Poor-quality threads are bound to snap, get fuzzy, or shed a lot of lint, which may contribute to tension problems and bad stitch quality. Equally, high-quality threads are required. They should be suitable for your type of fabric and purpose of sewing. Also, needles have to be appropriate. Dull or bent needles can damage the fabric, making the stitches irregular. Replace needles regularly to have excellent sewing qualities, especially when heavyweight or delicate fabric is used.

Adjustment of Tension and Stitch Setting

Proper setting of tension and the stitch is required to achieve professional results. Pucker or breakage can also result from a stitch length that is either too long or too short. Get familiar with the tension dial of your machine and experiment by setting different dial values until the desirable results are achieved. Similarly, it would help if you altered your stitch length and width according to the fabric type and type. Refer to your sewing machine’s user manual for recommended settings on different fabrics and sewing techniques.

Change Needles and Bobbins Regularly

They regularly change the needle, and the bobbin keeps common problems at bay. Needles get dull and bent over time, especially when used on double layers of fabric and material that is thicker in content. Use empty or improperly wound bobbins and replace the needle after every project or notice skipped stitches or fabric snagging. Likewise, empty or improperly wound bobbins may cause thread tension problems and spoil stitch quality. Remove several pre-wound bobbins and switch them out as needed to ensure smooth sewing.

Store Properly When Not in Use

Proper storage is key in preserving the performance and life of a sewing machine. Apply dust when not in use to protect the machine from dust, moisture, and direct sunlight. Please keep it in a safe, clean, dry place, free from dust and heat. However, if you are planning to store it for a longer time ensure to oil the moving parts to prevent rust and corrosion. By storing the sewing machine properly, you can use it anytime a new idea hits your mind. Incase it doesn’t function properly you can contact sewing machine repair near you.